I.SITE PLUS Radio Transmitter

Works even with power out

The I.SITE PLUS unit can be a very useful device especially when there is loss of power where it is located. As you can see from the image there are four buttons that are pre programed with custom alerts. Importantly, this device has an internal battery backup that enables it to send alert messages in the even of no other power.

It is possible to combine a number of I.SITE PLUS devices through a local area network (LAN) and a number if I.SITE PLUS units can operate in parallel providing that the radio coverage areas are not overlapped.

Its also possible to generate analog voice calls with an extension board. The board includes a relay output that can transfer the LED status to for example a building management system.

Features of I.SITE PLUS

  • Operational even with power loss from internal battery
  • The device as a 25 watts output power
  • Can be used outdoors
  • Strong resilient housing and 4 x buttons.

I.SITE PLUS is a POCSAG-transmitter for local alarm systems. It is equipped with an in-built backup battery including charging port. The backup battery ensures the possibility to send out alerts in the event of a power failure. It is controlled via Ethernet LAN (RJ-45) or via the in-built push buttons releasing predefined messages. POCSAG messages are prepared internally and sent via the transmission unit (1-25 W). Three local digital inputs are available. Messages at the digital inputs are either processed directly as POCSAG-messages or reported as additional status messages of the alarm server.

Multiple I.SITE PLUS can operate in parallel via LAN as long as the radio coverage areas do not overlap. The Swissphone protocol for integrating the I.SITE PLUS into your solution is available to third-party suppliers.

For further information on the I.SITE PLUS Radio Transmitter or call  a specialist on 0843 506 6000.

Data Sheet
 
 
 


Top